Canadian flagCanadian fulfilment · Free shipping $199+For laboratory research only
My account →Peptide Points →About Peptide Place →

Research tools

Peptide Aliquot Calculator

Divide a prepared peptide stock into equal portions or fixed-volume tubes. Estimate mass per tube, recoverable material and leftover stock using the values you enter.

No account neededCalculations stay in your browserClear formulas and records

Divide a prepared peptide stock into equal portions or fixed-volume tubes. Estimate mass per tube, recoverable material and leftover stock using the values you enter.

Peptide Aliquot Calculator

Plan equal portions or fixed-volume tubes, including dead volume and leftover stock.

Using labelled mass

A product reference can load labelled mass only. Experimental inputs remain yours to enter.

Peptide mass means the total amount entered for this vial, not the amount per sample.

Enter measured content

User-entered measured mass. Enter a documented target-peptide mass; do not infer it from HPLC purity.

Gross powder corrections are not provided because report-compatible analytical definitions have not been confirmed. Measured target-peptide mass receives no additional purity correction.

Final solution volume means the total solution volume after preparation, not necessarily the volume of liquid added.

Enter a whole number from 1 to 100.

Liquid expected to remain unrecovered in each filled tube. Zero is valid.

Optional tube-label record

Optional user-entered tube label. Do not enter personal information.

User-entered date; no expiry date is calculated.

User-entered reference only; not automatically verified. Not included in shared links.

Calculated estimates from your inputs

—

Enter the required values to calculate.

Concentration = mass ÷ stock volume. Recoverable mass per tube = concentration × (fill volume − dead volume).

Worked example

10 mg in 2 mL, divided into 4 equal tubes with zero dead volume.

Each tube receives 0.5 mL containing 2.5 mg. Real handling loss can reduce recovery.

Arithmetic illustration only; not a protocol or amount to use.

How to use the Peptide Aliquot Calculator

  1. Enter the total peptide mass and final stock solution volume, with the correct units.
  2. Choose equal-count tubes to divide the stock between a set number of tubes. Choose fixed-volume tubes when each tube should receive the same specified fill volume.
  3. Optionally enter dead volume per tube. This is liquid expected to remain unrecovered in each filled tube; zero is valid.
  4. Check gross fill, recoverable volume and mass, complete tube count and leftover stock. Save a calculation record with any label information you need.

Try an example shows how the selected planning mode handles tube volume and recovery. The example does not choose a sample size or storage condition for your experiment.

Understand aliquot units and mass balance

An aliquot is a measured portion of a stock solution. A millilitre contains 1000 microlitres. Splitting a uniform solution changes the volume and mass in each tube, but it does not change concentration. For example, 10 mg in 2 mL is 5 mg/mL. Dividing that stock into 10 equal tubes gives a gross fill of 200 µL and 1 mg per tube.

If 5 µL remains unrecovered in each of those tubes, the recoverable volume is 195 µL and the recoverable mass is 0.975 mg per tube. The stock mass is accounted for as recoverable material, held-back material and leftover stock. Dead volume is different from chemical degradation, and the planner does not calculate shelf life.

Labelled mass and measured content

Use the labelled mass as a nominal value, or enter documented measured target-peptide mass in measured-content mode. HPLC purity alone is not a measurement of milligrams in the vial. Calculated recoverable mass depends on the mass basis and loss estimate you enter; it is not an independent assay of the prepared tubes.

Choose a planning mode

Equal-count mode divides the entered stock volume among a chosen number of tubes. Fixed-volume mode calculates how many complete tubes can be filled at the entered volume and reports the remaining stock. Neither mode chooses the correct sample size for an experiment.

Account for dead volume

Some liquid may remain unrecovered in each tube. Enter an estimated dead volume if you want the planner to account for it. The estimate changes recoverable volume and mass, not the stock concentration. Dead volume is not a measurement of chemical degradation or adsorption.

Worked example

A 10 mg stock in a final 2 mL has a concentration of 5 mg/mL. Split equally into 10 tubes, each contains 200 microlitres and 1 mg before losses. If 5 microlitres per tube is unrecovered, the calculated recoverable amount is 195 microlitres and 0.975 mg per tube. Your equipment and material determine real recovery.

Record storage information

Label sample records with the compound, concentration and preparation date. Use material-specific documentation for storage conditions and stability. This planner does not calculate an expiry date or establish that a solution remains suitable for an experiment.

Common questions

Does splitting stock change concentration?

Dividing a uniform stock does not change its concentration. It changes the volume and mass held in each tube.

Is leftover stock the same as dead volume?

No. Leftover stock remains outside the completed fills. Dead volume is liquid expected to remain unrecovered inside filled tubes.

Can the planner predict shelf life?

No. Stability depends on the compound, formulation and conditions and requires appropriate evidence.

All Research Tools →

Laboratory arithmetic only. These tools do not recommend doses, administration or use in people or animals. Verify inputs, material identity and calculations independently.

Content and arithmetic reviewed 4 November 2026.

The Peptide Place Insider

Your first order.
15% better.
Get 15% off
your first order.

Your welcome code, orders and Peptide Points. One free account.

Join Insider emails and create your free Peptide Place account. Unsubscribe anytime. Adults 19+.

Privacy · Offer terms · Already joined? Sign in